Premium Studio Series
K18 Pilates Reformer – PU-Molded Curved Body Studio Machine
The K18 takes its shape from car interior design: a soft curved body instead of an extruded frame, in a warm luxury palette. Underneath it is a commercial machine, molded PU over aluminium alloy rails and pre-installed steel parts.
Fabrikadan Direkt Fiyatlandırma
24 saat içinde kişiye özel teklif
Fabrikadan Direkt Fiyatlandırma
Personalized quote within 24 hours, with spring mix, accessories and packing list in writing.
Born From Car Interior Design
The frame is molded PU, not welded tube. That is what makes the curved silhouette possible, and it is also why the surface can carry a soft-touch finish instead of paint. Seams are reduced because the shape comes out of the tool in one piece. Where most studiom machines read as gym equipment, the K18 reads as furniture. In a boutique studio with a street window, that difference is worth money.
Pilates'in Direnç Tarafı İçin Üretildi
Anti-stain microfiber skin wipes clean after class. Imported PU runners and glass-fiber nylon pulleys keep the carriage quiet through back-to-back sessions. 304 stainless adjuster pins stay crisp in humid coastal cities. It suits high-end studios, private training rooms and premium home or hotel installs, anywhere the machine is on show as much as in use.
K18 Features
PU Molded Body
Closed-tool PU foam over pre-installed steel parts. Curved surfaces come out as one piece, so there are fewer seams to work loose over years of classes.
Aluminium Alloy Rails
Carries the carriage without the flex of thin steel tubing, and does not rust in humid studios or seaside locations.
Multi-Position Footbar
Two to four more angle settings than most factory reformers, each held by a 304 stainless pin so a class can reset the same position between clients.
Korean Piano Wire Springs
Six springs with consistent tension from the first rep to the thousandth, colour coded for fast swaps between exercises.
Silent PU Runners
Imported wear-resistant PU wheels plus molded nylon glass-fiber pulleys. Six sessions a day without the room sounding like a gym.
Stainless Hardware and Rubber Feet
304 stainless pins do not seize in the wet season. Solid rubber damping pads stop the frame walking on polished floors and take the ring out of jumps.
K18 Specification
Teknik Özellik
K18 Detail
Genel Ölçüler
3020 × 840 × 954 mm (302 × 84 × 95.4 cm)
Net Ağırlık
143 kg
Brüt Ağırlık (paketli)
153 kg
Paketleme Ölçüsü
A box 1560 × 860 × 470 mm / B box 1560 × 680 × 470 mm
Body
PU foam molded body, aluminium alloy rails, pre-installed steel parts
Skin
Anti-stain microfiber
Carriage Cushion
High-elastic foam
Adjuster Pin
304 stainless steel
Runners
Imported PU wheels, wear-resistant and quiet
Pulleys
Molded nylon with glass fiber
Feet
Solid rubber anti-slip damping pads
Ayak Barı
Multi-position, 2 to 4 more settings than common studio reformers
Warranty, MOQ and lead time are confirmed in writing with each quotation, because they change with finish, spring set and order volume.
K18 Dimensions
Two K18 machines side by side need roughly 2 m between frame edges to let an instructor pass. It ships in two cartons, so it goes through a standard 900 mm door and into a lift before assembly – check the stairwell turn, not just the door width.
3020 mm
Length, frame end to frame end
840 mm
Width across the rails
954 mm
Height at the footbar end
600 mm
Clearance to plan at the head end for carriage travel
Spring Configuration
The spring set is optional and chosen per order. This is the standard combination.
Yay Rengi
Direnç
Adet
Yeşil
4 kg (hafif)
1
Sarı
8 kg
2
Siyah
12 kg
2
Sarı
44 kg (ağır)
1
Mixed sets are possible. Tell us whether you teach rehab, athletic or classical, and we adjust the mix before production.
Optional Add-Ons
Multi-Function Handle
Grip options for standing and side-lying work, and for clients who need wrist support.
Foot Plate
Broadens the standing surface at the foot end for balance work and jump variations.
Zıplama Tahtası
Converts the machine for cardio intervals without changing the carriage or spring setup.
Tek fabrika, dört platform — hepsi aynı 3 yıl garantisi kapsamında.
K34 Frame Fitness
İleri düzey programlar için amiral gemisi ticari frame-fitness reformeri.
K20 Reformer
Karma seviyeli grup stüdyoları için alüminyum alaşım her işe yarar model.
C26 Ticari
Yoğun kullanımlı stüdyolar için paslanmaz çelik iş atı.
K38 Reformer
Çift yay konfigürasyonlu uzun platformlu ticari reformer.
K18 Frequently Asked Questions
Is the PU body strong enough for commercial use?
Yes. The body is molded PU foam around pre-installed steel components, with aluminium alloy rails carrying the carriage. It is specified for studios running back-to-back classes, not only home use.
Does the curved body make it harder to keep clean?
It is easier in one respect and harder in another. Anti-stain microfiber wipes clean and hides hand marks, but the curve has more surface than a square frame, so a full wipe takes slightly longer.
Can I choose a different spring set?
Yes. The standard set is 1 × 4 kg, 2 × 8 kg, 2 × 12 kg and 1 × 44 kg. If you teach athletic or rehab classes, we change the mix before production starts.
How many footbar positions are there?
Can I put my own brand on it?
What is the lead time?
It depends on finish, spring set, accessories and order size, so we put it in writing with the quotation instead of quoting a generic number here.
500+
Dünya Genelinde Stüdyolar
150+
Hizmet Verilen Ülke
ISO 9001
Sertifikalı Tesis
23 yıl
OEM Üretimi
Ready to Equip Your Studio with K18 Reformers?
Send the number of machines and the room you are fitting. You get a written quotation with the spring mix, accessories, packing list and lead time, usually within 24 hours.