about us
About Megacore: A Pilates Reformer Manufacturer Since 2003
Megacore is the Pilates reformer brand of Guangzhou Leekon Fitness Equipment Co. Ltd. a fitness equipment manufacturer founded in 2003 with more than 20 years of production experience. We build commercial and home use reformers for studios, boutique chains, distributors, hotels and rehabilitation centres. Our own factory in Jiangmen, Guangdong handles frame fabrication, welding, powder coating and assembly, while our office and showroom in Tianhe, Guangzhou look after sales, product development and customer support. As a business-to-business manufacturer we supply wholesale volumes plus OEM, ODM and private label programmes. Every unit is inspected before it leaves the factory, and frame and parts carry a 3-year warranty.
A Factory, Not a Trading Company
Guangzhou Leekon Fitness Equipment Co., Ltd. (brand: Megacore) is based in Guangzhou, China — a major hub for fitness equipment manufacturing with a mature supply chain and skilled workforce.
Our team includes experienced engineers, QC specialists, and production staff who have been in the Pilates equipment industry for decades. Many of our senior technicians have over 15 years of hands-on experience in reformer frame welding, spring assembly, and upholstery finishing.
We operate in a 20,000+ sq.ft facility organized into dedicated zones: material storage, frame fabrication, assembly line, QC inspection, and packing. This layout allows us to maintain consistent quality across every unit produced.
Unlike general fitness equipment factories, our entire production line is dedicated to Pilates reformers. This single-minded focus allows us to deliver a level of craftsmanship, consistency, and customization that broad-line manufacturers cannot match.
Year
Milestone
2003
Guangzhou Leekon Fitness Equipment Co. Ltd. founded; fitness equipment manufacturing begins.
Available on request
First export orders shipped to overseas distributors.
Available on request
Jiangmen factory established at No. 8-2, Fengshan Fourth Road, bringing frame fabrication, welding and powder coating in-house.
Available on request
Megacore Pilates reformer line launched, targeted at commercial studios.
Available on request
Export footprint expanded across North America, Europe, the Middle East, Southeast Asia, Australia and South America.
Two Locations, Two Jobs
The factory and the commercial office sit about an hour apart in the Pearl River Delta, which keeps production close to the people who sell and support the product.
Production and quality control run from the Jiangmen plant. Buyer contact, product development and logistics coordination run from the Guangzhou showroom, where visiting customers can see the full reformer range in person.
Location
Address
Function
Factory
No. 8-2, Fengshan Fourth Road, Jiangmen, Guangdong, China
Manufacturing, quality control, container loading
Office & Showroom
Room 1712, Tower A, Poly Zhongjing, No. 406-2 Hua Sui Road, Tianhe, Guangzhou, China
Sales, product development, customer visits
Why Our Reformers Last: Design Choices, Not Just Assembly Steps
A reformer’s longevity isn’t determined by how it’s assembled. It’s determined by the design choices made long before production starts — what materials to use, which tolerance to hold, and where to spend more to avoid future problems. Here are a few decisions that define how our reformers perform over years of daily use.
🔩 Material Selection Over Cost
We use commercial-grade steel and marine-grade aluminum where appropriate. The frame sections that bear the most load are reinforced beyond minimum spec — even if it adds material cost.
⚙️ Spring & Pulley Assembly
Each spring is tension-tested individually before assembly. If a spring deviates more than 5% from spec, it's rejected — not used on the next tension setting.
🔍Carriage & Rail System
We use sealed bearing wheels with nylon raceways rather than bare steel-on-steel. This choice reduces noise, eliminates lubrication maintenance, and prevents the 'wobble' that develops on lower-spec reformers after months of use.
🎨 Finish That Survives Shipping & Sweat
Electrostatic powder coating is applied at a controlled thickness, then baked. This is more expensive than spray paint, but it doesn't chip during ocean freight and doesn't corrode in humid studio environments.
Why a Specialized Reformer Factory Matters
The Pilates reformer is a precision machine disguised as simple equipment. The carriage should glide with near-zero friction. The spring tension should be consistent across all four springs. The frame alignment must hold up through thousands of sessions — even when a 100kg client jumps on.
In a general fitness factory, a reformer is just another assembly station between the treadmill line and the cable machine line. The welders switch between frames. The QC process is generic. The engineering team doesn’t specialize in carriage dynamics or spring calibration.
At Megacore, the entire workshop is set up for reformers. Our welders know the frame geometry of every model. Our QC checklist is specific to reformer performance. When a studio owner tells us a spring feels stiff, we know exactly which spec to adjust. That level of specialization shows in the equipment — and in the longevity of every reformer we ship.
💬 Step 1: Discuss Your Needs
Share your specs, budget, and timeline. We'll advise on frame material, spring configuration, and finish options that fit your market
📐 Step 2: Sample Approval
We build 1-2 sample units to your requirements. You test and approve before we proceed to production.
🚢 Step 3: Production & Delivery
Order confirmation to shipment, with regular progress updates. DDP and FOB options available.
Our Clients Visit Us
Studio owners and distributors from around the world visit our Guangzhou factory to see the production line, test equipment, and build partnerships in person.
Frequently Asked Questions
Megacore is the Pilates reformer brand of Guangzhou Leekon Fitness Equipment Co. Ltd. a fitness equipment manufacturer founded in 2003. We design and build commercial and home use reformers in our own factory in Jiangmen, Guangdong, and support buyers from our showroom in Tianhe, Guangzhou. We supply studios, chains, distributors, hotels and rehabilitation centres, and we work as a business-to-business manufacturer rather than a retailer.
Our main business is wholesale to studios, chains, distributors, hotels and rehabilitation centres. That said, home use reformer models are available, and single-unit enquiries from professional buyers are handled by the same export team. Tell us your project and destination country and we will confirm the minimum order and the right shipping method for you.
Yes. We welcome buyers at both the Jiangmen factory and the Guangzhou showroom. Appointments are arranged in advance so the right engineer or sales contact is available and the range you want to see is ready. Many buyers combine a factory visit with a showroom review, then send a third-party inspector such as SGS or BV before shipment.
Ready to Work with a Professional Pilates Reformer Factory?
Whether you’re opening a studio, expanding, or launching a distribution brand — tell us your project and we’ll send you a quote with recommended models and bulk pricing.