Továrenská
Inside the Megacore Pilates Reformer Factory in Jiangmen
Our factory in Jiangmen, Guangdong, is a facility we own and operate, where every stage of a pilates reformer happens under one roof: frame cutting, welding, powder coating, upholstery, assembly, testing and packing. What you see here is the same floor your machines are built on, run by a team with more than 20 years of experience in fitness equipment manufacturing. The location puts us in the middle of southern China’s equipment-making region and within easy reach of the Guangzhou port cluster. This page walks through the workshops, the machinery that shapes quality, and how buyers can visit or audit the facility before placing a volume order.
Továreň v skratke
We own the facility and control every stage in-house, which keeps quality, cost and lead time in our own hands rather than a third party’s. Machines move through one continuous flow instead of bouncing between subcontractors.
Fact
Detail
Founded
2003
Experience
More than 20 years building pilates equipment
Facility
Owned factory in Jiangmen, Guangdong
Workshops
Eight production areas under one roof
Showroom
Guangzhou, Tianhe district
Processes in-house
Cutting, welding, powder coating, upholstery, assembly, testing, packing
Markets
Studios, chains, distributors, hotels and rehabilitation centers
Osem dielní, jeden výrobný tok
Materials move in a straight line through the factory, from raw metal at one end to crated reformers at the loading dock. That layout shortens handling time and makes quality checkpoints easy to enforce.
The table lists each workshop and the checkpoint that closes it out before the batch moves on.
Workshop
What happens there
Checkpoint before moving on
1. Raw material warehouse
Steel, aluminum, foam and upholstery vinyl stored and logged by batch
Incoming material inspection record
2. Cutting and forming
CNC tube cutting and bending to drawing tolerances
Dimensional verification against CAD
3. Welding and polishing
Precision jig welding, then grinding and polishing
Weld integrity and alignment inspection
4. Surface treatment and powder coating
Anti-rust treatment and electrostatic powder coating with oven curing
Coating thickness and adhesion test
5. Upholstery
Foam cut to density specs and covered with commercial-grade vinyl
Stitching and seam strength check
6. Assembly
Carriages, springs, ropes, straps and hardware fitted and torqued
Hardware torque and travel check
7. QC and testing
Load, glide and balance checks against the final inspection checklist
Full final inspection signed off
8. Packing and loading dock
Machines cleaned, wrapped, crated and staged for container loading
Packing completeness and loading plan
Machinery and Processes That Matter
The machinery list matters less than what it produces consistently. These are the processes that decide how a reformer feels and how long it lasts in a busy studio.
Proces
Method
Prečo je to dôležité
Rezanie rámu
CNC cutting and bending
Tight tolerances keep every unit geometrically identical
Zváranie
Zváranie v presných prípravkoch
Konštrukčná pevnosť a konzistentné vyrovnanie
Povrchová úprava
Anti-rust treatment and electrostatic powder coating
Durable, scratch-resistant studio surfaces
Čalúnenie
Commercial vinyl over density-tested foam
Padding that survives daily class use
Testovanie
Load, glide and balance checks on every unit
Machines are verified, not spot-checked
The Team Behind the Machines
A factory is only as good as the people on the floor. Our team includes metalworkers, welders, upholsterers and QC inspectors, many of whom have spent their working lives in fitness equipment manufacturing.
That experience shows up in details a specification cannot capture, such as seam placement, spring seating and how a carriage is shimmed to glide evenly. It is the reason a batch of reformers feels and performs the same.
- Welders trained on jig-based production for consistent frame alignment
- Upholsterers who control stitch tension and seam placement by hand
- QC inspectors who own a fixed checklist and sign off each unit
- An export team that handles documentation, container planning and shipping
Location, Ports and Export Logistics
Jiangmen sits in southern China’s fitness equipment manufacturing region, about 90 minutes from the Guangzhou port cluster. That short hop keeps export logistics simple and sea freight options broad.
Being in this region also means access to skilled metalworkers, upholsterers and finishing specialists who are part of the local industrial culture, which supports consistent output at volume.
- Close to Guangzhou ports for both full-container and consolidated sea freight
- Guangzhou showroom in Tianhe district for hands-on testing before you commit
- Export documents, freight booking and customs coordination handled in-house
- Third-party inspection and loading photos arranged before shipment
Factory Visits and Third-Party Audits
Serious buyers are invited to see the factory before placing volume orders. If you cannot travel, we walk the floor for you on a live video call and you choose which stations to see.
- Plan a visit around your production run and watch your own order being built
- The Guangzhou showroom is open for hands-on testing of finished models
- Third-party inspection reports can be arranged before payment
- Live video tours run on a time slot that suits your time zone
What Happens on the Floor During Your Order
Your order moves through the same stations as any other batch: cutting, welding, coating, upholstery, assembly, testing and packing. It is never diverted to a different line or farmed out.
We send milestone photos and videos so you can follow the batch without travelling, and you can request a live call to see your line in progress at any stage.
- Batch tracked from material release through to packing list sign-off
- Photo and video updates at welding, coating, assembly and packing milestones
- Optional live call to watch your own units on the line
- Final inspection records filed per batch and shared with your inspector on request
Your Tour Stops
The tour follows the production flow so you see how each stage feeds the next. You can stop longer at any station, and if your own order is on the line we will find it for you.
Stop
What you see
Prečo je to dôležité
1. Entrance and showroom
Finished C26, K20 and K30 models on display
Test the product before you see how it is made
2. Material warehouse
Steel, aluminum, foam and vinyl logged by batch
See incoming inspection and raw inputs
3. Cutting, welding and polishing
CNC cutting, precision jig welding and grinding
Where frame strength is decided
4. Coating line
Anti-rust treatment and powder coating with curing oven
How the finish resists years of studio use
5. Upholstery
Foam cutting and vinyl stitching
How much hand craftsmanship goes into each pad
6. Assembly and testing
Final assembly, spring fitting and the 12-point inspection
Watch units tested against the checklist
7. Packing and loading
Wrapping, crating and container loading
How machines are prepared for the journey
8. Guangzhou showroom
Finished models for hands-on testing
A relaxed space to compare and choose
Three Ways to Take the Tour
Not every buyer can fly to Guangdong, so we make it easy to verify the factory from wherever you are. Each option shows the same floor; they differ in how much preparation they need and how much you can touch and test.
- Live video tour - book a time and we walk the floor with you on a video call; you choose the stations and can bring your full team or QC person into the call
- Online tour - start with our 360-degree virtual tour and factory videos for a first look before you book a live session
- Visit in person - the factory is in Jiangmen, Guangdong, about 90 minutes from Guangzhou Baiyun Airport, with pickup arranged for serious buyers
Tour option
Najvhodnejší pre
What you need
Live video tour
Buyers who cannot travel or want a first verification
A booked time slot and an internet connection
Online / virtual tour
A first look before a live session
A browser or a headset
In-person visit
Buyers placing volume orders
Travel to Guangdong, arranged with our team
Practical Visit Information
A little planning makes a factory visit far more productive. The details below cover travel, timing and what our team will have ready for you.
Detail
Information
Factory location
Jiangmen, Guangdong, southern China
Nearest airport
Guangzhou Baiyun International Airport, roughly 90 minutes by car
Showroom
Guangzhou, Tianhe district, with finished models for testing
Tour duration
Half a day for the full production walkthrough
Showroom
Guangzhou, Tianhe district
Languages
Arrange at least a few days ahead; align with your production run if you want to see your own order
Booking
Booking
Video tour timing
Scheduled at a time that suits your time zone
What to Bring and What You Will Leave With
A productive visit is a prepared one. Bring the questions you could not resolve by email, your model shortlist and any specifications you want to discuss on the floor.
Most serious buyers leave with their shortlist narrowed, a sample order placed or a production schedule confirmed.
- Your checklist of technical and commercial questions
- Your model shortlist and target market details
- Any customization or branding ideas you want to test on real units
- Your QC contact, if you want a live call from the inspection area
What Visitors Typically Take Away
Buyers who tour the factory tend to describe the same experience: seeing a working production line and live inspection is more convincing than any brochure. The visit answers the practical questions that email cannot, such as how a carriage glides, how padding feels and how frames are welded.
Video visitors value being able to see their exact model on the line without travelling.
Booking a Tour
Tell us your preferred date or time and whether you want to visit in person or by video. For in-person visits we arrange logistics and pickup details, and for video tours we send a meeting link and walk the floor with you.
If your goal is to see your own order, book around your production run and we will schedule the tour so your batch is live on the line.
- Contact us with your preferred date, time zone and tour type
- We confirm the schedule and, for in-person visits, share travel and pickup details
- Bring your question list, model shortlist and customization ideas
- Your QC contact can join a live call from the inspection area if you wish
Často kladené otázky
The factory is in Jiangmen, Guangdong, in southern China’s fitness equipment manufacturing region and about 90 minutes from the Guangzhou port cluster. Our showroom and office are in the Tianhe district of Guangzhou, where finished models are available for hands-on testing.
Yes. We arrange visits for serious buyers, including a guided walkthrough of every workshop and hands-on testing of finished models. If travel is not practical, we run a live video tour where you pick which stations to see in real time.
Yes. We support pre-shipment inspection by SGS, BV or your own agent, and external inspectors get full access to the production floor, finished units and batch records. If your procurement process needs an independent report before payment, we will coordinate the timing.
Your order moves through the same stations as any other: cutting, welding, coating, upholstery, assembly, testing and packing. We send milestone photos and videos so you can follow the batch without travelling, and you can request a live call to see your line in progress.
Súvisiace sprievodcovia
Opýtajte sa nás na čokoľvek o továrni
Kapacita, stroje, podmienky auditu — odpovede priamo od výrobného tímu.